Aladdin Chandelier keypad instructions

NORMAL OPERATION: --

To operate the light lift, first enable the controller. 

To enable the controller, press the SET button until it beeps and the SET light flashes. 

Now, press the UP button. The controller is enabled when it beeps and the READY light turns green. 

The controller becomes disabled after 90 seconds of inactivity.--

If controller is programmed, press the AUTO button then the DOWN button to run the light lift to the ‘down position.’ 

Press the AUTO button then the UP button to return the light lift to the HOME POSITION. 

Press the UP button to stop the lift from running down at any time. Press the DOWN button to stop the lift from running up at any time.--

If the controller has not been programmed, press the DOWN button to run the light lift to the desired elevation. 

Press the UP button to return the chandelier to the HOME POSITION.--

Although the controller will disable after 90 seconds of inactivity, it may be necessary to disable it on your own. 

To do so, press the SET button until it beeps and the SET light flashes. 

Now, press the UP button. The controller is disabled when it beeps and the READY light goes out